– Change the username and password

How to change Wi-Fi password using or Netgear R7500-200NAS Nighthawk X4 Router [Solved]

It is highly recommended that the user changes the default username and password for their router as the default information is provided online for ease of access regarding the initial login for all the users. The user can simply login to Netgear admin GUI using the default IP address i.e. or Any unauthorized user can access the user’s network without their permission using the default credentials. After that, the user must update the firmware for their router if there are any updates available. The Netgear Genie notifies the user regarding the updates. The firmware is basically the Operating Software of the router. It helps orchestrates all the functions within the hardware of the router.

Netgear password reset not working?Netgear R7500-200NAS Nighthawk X4 Router [Solved]

Just follow the simple steps mentioned below:
  • Firstly, open any internet browser and type in the address bar. Press enter.
  • The admin login page will appear. There, the user will be prompted to enter the default information regarding their Netgear router.
  • The default username is “admin” and the default password is “password” for most of the Netgear routers. On the other hand, it may vary for some routers. The username and password will be case sensitive.
  • Once the user successfully enters the router’s dashboard, the user will see the configurations page of IP address.
  • On the System Status, the user will see the Network Name (SSID) and the Network Key (passphrase) options with the respective fields provided below them.
  • Then, enter the new desired username and password within the respective fields to change the default username and password.
  • Finally, click Save to implement the changes made.

In sum, the user can reconnect all their devices using the new username and password using the default IP address i.e.

Troubleshooting steps to reset the Netgear R7500-200NAS Nighthawk X4 Router:

  • Firstly, the reset button is located at the back of the router within a very small hole to prevent any accidental reset.
  • Then, using a paper clip, press and hold the reset button for about ten seconds. Release the reset button after ten seconds.
  • Once the power light becomes green/white and stable, the router will have been restored back to its factory default settings.

Conclusion: Once the router has been reset, all the personalized settings of the user will also get reset. This process cannot be reversed once the router has been reset.

If you wish to read more about the setup of your router, click here.

Nighthawk routerlogin setup guide for AC1900.

Nighthawk routerlogin troubleshooting steps to login to the AC1900 Smart Wi-Fi Router Model: R7000

  • First of all, to acces the nighthawk routerlogin admin panel, type www.routerlogin.net in any internet browser and hit enter.
  • The Nighthawk routerlogin admin page will then appear.
  • Then, enter the default credentials in the fields provided on the dialog box. They are usually shared at the bottom of the router.
  • Once the user has successfully logged in to the router, the Setup Wizard will appear.
  • The Setup Wizard will detect the type of connecction. For all the wired connections, the Wizard detects the connection as Dynamic IP.
  • Finally, click Save to make sure the changes are implemented in the nighthawk routerlogin admin panel.

Hence, the user will have logged in to the router successfully using Nighthawk routerlogin.

Nighthawk routerlogin troubleshooting steps to update the firmware of the AC1900 Smart Wi-Fi Router Model: R7000

  • Firstly, download the latest firmware version from the NETGEAR Download Center.
  • Then, open the router admin page by typing www.routerlogin.net in the address bar and press enter. This will take you to the Nighthawk routerlogin admin panel.
  • After that, enter the default information in the fields provided within the dialog box. The default information is usually shared at the back of the routers.
  • For most routers, the default username will be admin and the default password will be password.
  • The web based interface will now appear. Click the ADVANCED option.
  • Then, click the Administration option. The Firmware Update option will be present in the menu.
  • Click Browse to locate the downloaded file. Click Upload.
  • Finally, the firmware will begin updating.

Once the firmware has successfully updated, the router will reboot itself.


Above all, do not interrupt the firmware update process. That can damage the firmware of the Netgear router. Do not download the firmware from any third party websites.

In addition, if you are facing any issues with the routerlogin admin panel or are facing any issues while resetting the router, click here to read more.

Routerlogin setup – Netgear router setup

Setting up the Netgear router using a wireless connection:

Setting up the router has become an easy task thanks to the easy accessibility to routerlogin setup process . It will take you step by step and make sure that you find it the least problematic in setting up the router. Here are some steps to set up your Netgear router.

Firstly, the user only needs to connect the wireless device to the preset wireless settings of their Netgear router.

Here are the troubleshooting steps:

  • Firstly, connect the modem and the router using an Ethernet cable.
  • Then, turn on your modem and wait for the lights to become stable. This will reboot the devices.
  • The power light will be solid green or white depending on the model of your router.
  • Then type in www.routerlogin.net in the address bar of a browser.
  • You will require the default credentials . For instance, they mat be written at either the back or bottom of the device.
  • After that, open the wireless connections manager on your wireless device and connect to the network name of your router.
  • After connecting, enter the password.
  • Open up any web browser of your choice and the Netgear Genie will automatically display.
  • If by some off chance the Netgear Genie does not display, then you can go to the address bar of the web browser and type www.routerlogin.net and press enter. In short, this will allow you to access routerlogin setup admin GUI.
  • You will be prompted to put in the username and password. The default username is “admin” and similarly, the default password is “password”.
  • Lastly, follow the steps provided in the Netgear Genie to configure the router.

Finally, the Congratulations page will now appear once you have configured the router. The routerlogin setup process will now be completed. Now you can start using the internet.

Find more troubleshooting steps to help setup your router here.